TAILORING- PAGE 1
TAILORING- PAGE 1 MCQs
1. Another name for plain patch.
(A) Hemmed patch (B) Print patch (C) Three-cornered tear (D) Darned in patch
Ans: A
2. Name the collar most widely used in girl's dresses.
(A) Peter pan collar (B) Shirt collar (C) Round collar (D) Chinese collar
Ans: A
3. The newly constructed fabrics as they come out from the loom is called ______.
(A) white cloth (B) plain cloth (C) grey goods (D) None of these
Ans: C
4. Darning should be done on the ______ side of the material.
(A) wrong (B) both sides (C) seam side (D) right
Ans: D
5. ______ are finished openings.
(A) Fullness (B) Plackets (C) Seams (D) Seam finishes
Ans: B
6. Anything that is done to fibre, yarn or fabric before or after weaving to improve the appearance feel, serviceability & durability is defined as
(A) felting (B) cleaning (C) finishes (D) printing
Ans: C
7. In diagonal tear ______ yarns are cut.
(A) warp yarns (B) weft yarns (C) both warp & weft yarn (D) None of these
Ans: C
8. ______are wedge shaped pieces usually set into the bottom part of the seam of the skirt.
(A) Flares (B) Pleats (C) Godets (D) Gatherings
Ans: C
9. An example of vegetable dye.
(A) Iron buff (B) Tyrian purple (C) Ink (D) Turmeric
Ans: D
10. Button hole are usually worked on the _________.
(A) underlap (B) overlap (C) seams (D) None of these
Ans: B
11. The length of openings in skirt should be about _________.
(A) 2" (B) 5" (C) 15" (D) 7"
Ans: D
12. Name the dye most suitable for cotton fabrics.
(A) Direct dye (B) Vat dye (C) Basic dye (D) Developed dye
Ans: B
13. Name the placket commonly used on men’s shirt sleeve openings.
(A) Tailored placket (B) One piece placket (C) Two piece placket (D) None of these
Ans: A
14. Plackets in women's garment should lap
(A) Right over the left (B) Left over right (C) No specific way (D) None of these
Ans: A
15. Name a resist dyeing method.
(A) Tie & dye (B) Printing (C) Cross dyeing (D) Piece dyeing
Ans: A
16. Length of the wrist opening should be about ______.
(A) 1" (B) 2" (C) 1/2" (D) 4"
Ans: D
17. Name the common term used for zips, button & button hole, press button, hooks.
(A) Plackets (B) Fasteners (C) Fullness (D) Finishes
Ans: B
18. Block printing is a ______ method.
(A) machine printing (B) resist printing (C) pigment printing (D) hand printing
Ans: D
19. Continuous bound placket is also called ______.
(A) three-piece placket (B) two-piece placket (C) one-piece placket (D) None of these
Ans: C
20. ______ is the opposite of discharge printing.
(A) Roller printing (B) Pigment printing (C) Resist printing (D) None of these
Ans: C
(A) Hemmed patch (B) Print patch (C) Three-cornered tear (D) Darned in patch
Ans: A
2. Name the collar most widely used in girl's dresses.
(A) Peter pan collar (B) Shirt collar (C) Round collar (D) Chinese collar
Ans: A
3. The newly constructed fabrics as they come out from the loom is called ______.
(A) white cloth (B) plain cloth (C) grey goods (D) None of these
Ans: C
4. Darning should be done on the ______ side of the material.
(A) wrong (B) both sides (C) seam side (D) right
Ans: D
5. ______ are finished openings.
(A) Fullness (B) Plackets (C) Seams (D) Seam finishes
Ans: B
6. Anything that is done to fibre, yarn or fabric before or after weaving to improve the appearance feel, serviceability & durability is defined as
(A) felting (B) cleaning (C) finishes (D) printing
Ans: C
7. In diagonal tear ______ yarns are cut.
(A) warp yarns (B) weft yarns (C) both warp & weft yarn (D) None of these
Ans: C
8. ______are wedge shaped pieces usually set into the bottom part of the seam of the skirt.
(A) Flares (B) Pleats (C) Godets (D) Gatherings
Ans: C
9. An example of vegetable dye.
(A) Iron buff (B) Tyrian purple (C) Ink (D) Turmeric
Ans: D
10. Button hole are usually worked on the _________.
(A) underlap (B) overlap (C) seams (D) None of these
Ans: B
11. The length of openings in skirt should be about _________.
(A) 2" (B) 5" (C) 15" (D) 7"
Ans: D
12. Name the dye most suitable for cotton fabrics.
(A) Direct dye (B) Vat dye (C) Basic dye (D) Developed dye
Ans: B
13. Name the placket commonly used on men’s shirt sleeve openings.
(A) Tailored placket (B) One piece placket (C) Two piece placket (D) None of these
Ans: A
14. Plackets in women's garment should lap
(A) Right over the left (B) Left over right (C) No specific way (D) None of these
Ans: A
15. Name a resist dyeing method.
(A) Tie & dye (B) Printing (C) Cross dyeing (D) Piece dyeing
Ans: A
16. Length of the wrist opening should be about ______.
(A) 1" (B) 2" (C) 1/2" (D) 4"
Ans: D
17. Name the common term used for zips, button & button hole, press button, hooks.
(A) Plackets (B) Fasteners (C) Fullness (D) Finishes
Ans: B
18. Block printing is a ______ method.
(A) machine printing (B) resist printing (C) pigment printing (D) hand printing
Ans: D
19. Continuous bound placket is also called ______.
(A) three-piece placket (B) two-piece placket (C) one-piece placket (D) None of these
Ans: C
20. ______ is the opposite of discharge printing.
(A) Roller printing (B) Pigment printing (C) Resist printing (D) None of these
Ans: C
21. A right angled triangle is a _____.
(A) measuring equipment (B) marking equipment (C) cutting equipment (D) finishing equipment
Ans: A
22. ______ is sleeve that just covers the top of arm, but does not continue under it.
(A) Bell sleeve (B) Cape/cap sleeve (C) Set-in sleeve (D) Raglan sleeve
Ans: B
23. Name the seam finish suitable for heavy material like flannel.
(A) Over cast finish (B) Bound seam edge finish (C) Herring bone finished seam (D) Pinked finish
Ans: C
24. Name a marking equipment.
(A) measuring tape (B) scissors (C) chalk in pencil form (D) None of the above
Ans: C
25. ______ is measured round the base of the throat.
(A) Neck (B) Chest (C) Waist (D) None of the above
Ans: A
26. Fullness is introduced in fabrics using _______.
(A) darts & tucks (B) seam (C) seam finishes (D) None of these
Ans: A
27. _______are used to finish the raw edges of seams of garments.
(A) Embroidery scissors (B) Button hole scissors (C) Shears (D) Pinking shears
Ans: D
28. _______ is the principle which gives movement to the designs.
(A) Rhythm (B) Proportion (C) Emphasis (D) Harmony
Ans: A
29. Name the dart used in one piece dresses.
(A) Standard dart (B) Double pointed dart (C) Gathers (D) Pleats
Ans: B
30. In sewing machine, the needle is attached to ________.
(A) needle bar (B) pressure bar lifter (C) throat plate (D) None of these
Ans: A
(A) measuring equipment (B) marking equipment (C) cutting equipment (D) finishing equipment
Ans: A
22. ______ is sleeve that just covers the top of arm, but does not continue under it.
(A) Bell sleeve (B) Cape/cap sleeve (C) Set-in sleeve (D) Raglan sleeve
Ans: B
23. Name the seam finish suitable for heavy material like flannel.
(A) Over cast finish (B) Bound seam edge finish (C) Herring bone finished seam (D) Pinked finish
Ans: C
24. Name a marking equipment.
(A) measuring tape (B) scissors (C) chalk in pencil form (D) None of the above
Ans: C
25. ______ is measured round the base of the throat.
(A) Neck (B) Chest (C) Waist (D) None of the above
Ans: A
26. Fullness is introduced in fabrics using _______.
(A) darts & tucks (B) seam (C) seam finishes (D) None of these
Ans: A
27. _______are used to finish the raw edges of seams of garments.
(A) Embroidery scissors (B) Button hole scissors (C) Shears (D) Pinking shears
Ans: D
28. _______ is the principle which gives movement to the designs.
(A) Rhythm (B) Proportion (C) Emphasis (D) Harmony
Ans: A
29. Name the dart used in one piece dresses.
(A) Standard dart (B) Double pointed dart (C) Gathers (D) Pleats
Ans: B
30. In sewing machine, the needle is attached to ________.
(A) needle bar (B) pressure bar lifter (C) throat plate (D) None of these
Ans: A
31. _______brings over all stability to design through the satisfying arrangement of its parts.
(A) Repetition (B) Rhythm (C) Balance (D) Emphasis
Ans: C
32. _______ is the opposite of box pleat.
(A) Fan pleats (B) Knife pleats (C) Inverted pleats (D) Pinch pleat
Ans: C
33. Which one is removed from ordinary sewing machine when special attachments for hemming, binding etc are used ?
(A) Throat plate (B) Feed dog (C) Bobbin winder (D) Pressure foot
Ans: D
34. For drafting a basic skirt which measurements given below is needed ?
(A) Skirt length & hip round (B) Skirt length, waist round & hip round (C) Skirt length only (D) Hip round & waist round only
Ans: B
35. When several rows of gathering [3 or more] are used for a decorative finish, these are termed
(A) Gathers (B) Godets (C) Flares (D) Shirring
Ans: D
36. One cause of upper thread tension is _______.
(A) bobbin is wound fully (B) more tension on the disc of tension regulator (C) when the needle is too long (D) None of these
Ans: B
37. _______ lines usually add softness, grace & feminity.
(A) Curve line (B) Diagonal line (C) Vertical (D) Horizontal
Ans: A
38. True bias fall on a _______ line at 45 degree to length wise & cross wise grain.
(A) diagonal line (B) curved line (C) horizontal line (D) vertical line
Ans: A
39. Name the frock without a joint at the waist.
(A) Umbrella frock (B) A-line frock (C) Flared frock (D) Frilled frock
Ans: B
40. A colour has how many dimensions ?
(A) One (B) Two (C) Five (D) None of these
Ans: D
41. Scientific study of measurements of human body is
(A) anthropometry (B) geometry (C) graphics (D) None of these
Ans: A
42. Given below are some colour schemes, identify the accented neutral one.
(A) Yellow & violet (B) Blue & orange (C) Red & green (D) Black & green
Ans: D
43. In cut work the loop of the buttonhole stitch should be facing ________ the design.
(A) outwards (B) inwards (C) both sides (D) None of these
Ans: B
44. Which measurement is taken from waistline to the floor or till the desired length ?
(A) Waist front length (B) Waist back length (C) Arm length (D) Skirt length
Ans: D
45. Name the secondary colours in prang colour chart.
(A) Red, green & yellow (B) Orange, violet & green (C) Red, blue & yellow (D) None of these
Ans: B
46. The width of the bias strip is usually
(A) l" (B) 2" (C) 1¼" to 1½" (D) 2¼" to 2½"
Ans: C
47. Based on the length fibres are of ______ types.
(A) 1 (B) 5 (C) 2 (D) 4
Ans: C
48. The coolest hue.
(A) Blue (B) Red (C) Orange (D) Yellow
Ans: A
49. Facing are of ______ types.
(A) three (B) four (C) five (D) two
Ans: D
50. Vegetable fibres are made of ______.
(A) protein (B) cellulose (C) inorganic material (D) acids
Ans: B
51. Find the odd one out.
(A) hemmer foot (B) tucker (C) presser foot/pressure foot (D) zipper foot
Ans: C
52. Which facing is used to finish square or V - shaped necklines ?
(A) Shaped facing (B) Single binding (C) Double binding (D) None of these
Ans: A
53. Which fibre is known as artificial silk ?
(A) Nylon (B) Rayon (C) Asbestos (D) Polyester
Ans: B
54. The process of removing dirt from the cloth & finishing them to regain the appearance of neatness as a new fabric is ______.
(A) mending (B) stain removal (C) laundering (D) dyeing
Ans: C
55. French binding is also known as ______.
(A) facing (B) single binding (C) double binding (D) None of these
Ans: C
56. Linen fibres is obtained from which part of flax plant ?
(A) Leaves (B) Root (C) Seed (D) Stem
Ans: D
57. Name the fibre which burns slowly with the smell of burning hair.
(A) Cotton (B) Wool (C) Linen (D) Synthetic fibre
Ans: B
58. Facing, binding & collars are three common _________.
(A) plakets (B) openings (C) seams (D) necklines
Ans: D
59. The length wise yarns in a fabric is called _____.
(A) weft (B) filling (C) warp (D) fibres
Ans: C
(A) Repetition (B) Rhythm (C) Balance (D) Emphasis
Ans: C
32. _______ is the opposite of box pleat.
(A) Fan pleats (B) Knife pleats (C) Inverted pleats (D) Pinch pleat
Ans: C
33. Which one is removed from ordinary sewing machine when special attachments for hemming, binding etc are used ?
(A) Throat plate (B) Feed dog (C) Bobbin winder (D) Pressure foot
Ans: D
34. For drafting a basic skirt which measurements given below is needed ?
(A) Skirt length & hip round (B) Skirt length, waist round & hip round (C) Skirt length only (D) Hip round & waist round only
Ans: B
35. When several rows of gathering [3 or more] are used for a decorative finish, these are termed
(A) Gathers (B) Godets (C) Flares (D) Shirring
Ans: D
36. One cause of upper thread tension is _______.
(A) bobbin is wound fully (B) more tension on the disc of tension regulator (C) when the needle is too long (D) None of these
Ans: B
37. _______ lines usually add softness, grace & feminity.
(A) Curve line (B) Diagonal line (C) Vertical (D) Horizontal
Ans: A
38. True bias fall on a _______ line at 45 degree to length wise & cross wise grain.
(A) diagonal line (B) curved line (C) horizontal line (D) vertical line
Ans: A
39. Name the frock without a joint at the waist.
(A) Umbrella frock (B) A-line frock (C) Flared frock (D) Frilled frock
Ans: B
40. A colour has how many dimensions ?
(A) One (B) Two (C) Five (D) None of these
Ans: D
41. Scientific study of measurements of human body is
(A) anthropometry (B) geometry (C) graphics (D) None of these
Ans: A
42. Given below are some colour schemes, identify the accented neutral one.
(A) Yellow & violet (B) Blue & orange (C) Red & green (D) Black & green
Ans: D
43. In cut work the loop of the buttonhole stitch should be facing ________ the design.
(A) outwards (B) inwards (C) both sides (D) None of these
Ans: B
44. Which measurement is taken from waistline to the floor or till the desired length ?
(A) Waist front length (B) Waist back length (C) Arm length (D) Skirt length
Ans: D
45. Name the secondary colours in prang colour chart.
(A) Red, green & yellow (B) Orange, violet & green (C) Red, blue & yellow (D) None of these
Ans: B
46. The width of the bias strip is usually
(A) l" (B) 2" (C) 1¼" to 1½" (D) 2¼" to 2½"
Ans: C
47. Based on the length fibres are of ______ types.
(A) 1 (B) 5 (C) 2 (D) 4
Ans: C
48. The coolest hue.
(A) Blue (B) Red (C) Orange (D) Yellow
Ans: A
49. Facing are of ______ types.
(A) three (B) four (C) five (D) two
Ans: D
50. Vegetable fibres are made of ______.
(A) protein (B) cellulose (C) inorganic material (D) acids
Ans: B
51. Find the odd one out.
(A) hemmer foot (B) tucker (C) presser foot/pressure foot (D) zipper foot
Ans: C
52. Which facing is used to finish square or V - shaped necklines ?
(A) Shaped facing (B) Single binding (C) Double binding (D) None of these
Ans: A
53. Which fibre is known as artificial silk ?
(A) Nylon (B) Rayon (C) Asbestos (D) Polyester
Ans: B
54. The process of removing dirt from the cloth & finishing them to regain the appearance of neatness as a new fabric is ______.
(A) mending (B) stain removal (C) laundering (D) dyeing
Ans: C
55. French binding is also known as ______.
(A) facing (B) single binding (C) double binding (D) None of these
Ans: C
56. Linen fibres is obtained from which part of flax plant ?
(A) Leaves (B) Root (C) Seed (D) Stem
Ans: D
57. Name the fibre which burns slowly with the smell of burning hair.
(A) Cotton (B) Wool (C) Linen (D) Synthetic fibre
Ans: B
58. Facing, binding & collars are three common _________.
(A) plakets (B) openings (C) seams (D) necklines
Ans: D
59. The length wise yarns in a fabric is called _____.
(A) weft (B) filling (C) warp (D) fibres
Ans: C
60:- __________ is the distance from waist to base of crotch of the figure.
A:-Crotch point
B:-Crotch depth
C:-Crotch level
D:-Crotch extention
Ans: B
61:-Finished opening in a garment is called
A:-Pleat
B:-Placket
C:-Pocket
D:-Panel
Ans: B
62:-Select an odd one
A:-Bobbin thread
B:-Bobbin winder
C:-Thread guide
D:-Thread take up lever
Ans: A
63:-Repairing method of a garment is called
A:-Sizing
B:-Bleaching
C:-Trimming
D:-Mending
Ans: D
64:-Which one has the main purpose of decorative work?
A:-Hems
B:-Darts
C:-Tucks
D:-Plackets
Ans: C
65:-Why the thread breaks immediately?
A:-Poor thread
B:-Needle is fixed much lower
C:-Small needle
D:-The wheel is turned in the wrong direction
Ans: D
66:-Select a pressing tool
A:-Sleeve crown
B:-Sleeve board
C:-Sleeve cutter
D:-None of these
Ans: B
67:-A small 1/8 inch hole is done with .
A:-Awll
B:-Notcher
C:-Scissors
D:-Shears
Ans: A
68:-In which of the following machines lower and upper knives are used?
A:-Chain stitch machine
B:-Lock stitch machine
C:-Over lock machine
D:-Flat lock machine
Ans: C
69:-The width of material before pleating is called .
A:-Pleat width
B:-Pleat depth
C:-Pattern size
D:-Pattern width
Ans: D
70:-Which among the following is not a seam finish?
A:-Gathering B:-Pinking
C:-Over locking D:-Over casting
Ans: A
71:-In order to stitch fast on sewing machines is pressed faster.
A:-Hand wheel
B:-Take up lever
C:-Foot pedal
D:-Power switch
Ans: C
72:-Which is the line that commonly curves from the armhole down to the waist line through bust point?
A:-Yoke line
B:-Princess line
C:-Chest line
D:-Waist line
Ans: B
73:-The process of arranging the fabric one layer above the other layer for mass production is known as .
A:-Grading
B:-Marking
C:-Trimming
D:-Spreading
Ans: D
74:-Select a pant derivation
A:-Ballerina
B:-Jacket
C:-Jamaica
D:-None of these
Ans: C
75:-The right side of the fabric
A:-Bright
B:-Grain
C:-Pile
D:-Face
Ans: D
76:-What is used in between original cloth and lining for giving shape to the garment?
A:-Interlining
B:-Lining
C:-Dart
D:-Curves
Ans: A
77:-To fasten the button/zip left sided of opening
A:-Fly catch
B:-Fly
C:-Facing
D:-Binding
Ans: B
78:-The conversion of fabric in to garment
A:-Turning up
B:-Making up
C:-Slot
D:-Mass production
Ans: B
79:-Identify the fastenings
A:-Velcro
B:-Tag C:-Vent
D:-Teak
Ans: A
80:- ________ is a narrow strip of cloth used in finishing the mouth of the cut pocket.
A:-Fusing B:-Bridle
C:-Welt D:-Godet
Ans: C
A:-Crotch point
B:-Crotch depth
C:-Crotch level
D:-Crotch extention
Ans: B
61:-Finished opening in a garment is called
A:-Pleat
B:-Placket
C:-Pocket
D:-Panel
Ans: B
62:-Select an odd one
A:-Bobbin thread
B:-Bobbin winder
C:-Thread guide
D:-Thread take up lever
Ans: A
63:-Repairing method of a garment is called
A:-Sizing
B:-Bleaching
C:-Trimming
D:-Mending
Ans: D
64:-Which one has the main purpose of decorative work?
A:-Hems
B:-Darts
C:-Tucks
D:-Plackets
Ans: C
65:-Why the thread breaks immediately?
A:-Poor thread
B:-Needle is fixed much lower
C:-Small needle
D:-The wheel is turned in the wrong direction
Ans: D
66:-Select a pressing tool
A:-Sleeve crown
B:-Sleeve board
C:-Sleeve cutter
D:-None of these
Ans: B
67:-A small 1/8 inch hole is done with .
A:-Awll
B:-Notcher
C:-Scissors
D:-Shears
Ans: A
68:-In which of the following machines lower and upper knives are used?
A:-Chain stitch machine
B:-Lock stitch machine
C:-Over lock machine
D:-Flat lock machine
Ans: C
69:-The width of material before pleating is called .
A:-Pleat width
B:-Pleat depth
C:-Pattern size
D:-Pattern width
Ans: D
70:-Which among the following is not a seam finish?
A:-Gathering B:-Pinking
C:-Over locking D:-Over casting
Ans: A
71:-In order to stitch fast on sewing machines is pressed faster.
A:-Hand wheel
B:-Take up lever
C:-Foot pedal
D:-Power switch
Ans: C
72:-Which is the line that commonly curves from the armhole down to the waist line through bust point?
A:-Yoke line
B:-Princess line
C:-Chest line
D:-Waist line
Ans: B
73:-The process of arranging the fabric one layer above the other layer for mass production is known as .
A:-Grading
B:-Marking
C:-Trimming
D:-Spreading
Ans: D
74:-Select a pant derivation
A:-Ballerina
B:-Jacket
C:-Jamaica
D:-None of these
Ans: C
75:-The right side of the fabric
A:-Bright
B:-Grain
C:-Pile
D:-Face
Ans: D
76:-What is used in between original cloth and lining for giving shape to the garment?
A:-Interlining
B:-Lining
C:-Dart
D:-Curves
Ans: A
77:-To fasten the button/zip left sided of opening
A:-Fly catch
B:-Fly
C:-Facing
D:-Binding
Ans: B
78:-The conversion of fabric in to garment
A:-Turning up
B:-Making up
C:-Slot
D:-Mass production
Ans: B
79:-Identify the fastenings
A:-Velcro
B:-Tag C:-Vent
D:-Teak
Ans: A
80:- ________ is a narrow strip of cloth used in finishing the mouth of the cut pocket.
A:-Fusing B:-Bridle
C:-Welt D:-Godet
Ans: C
81:-The margin which remains in its width for loosening the garment
A:-Layout
B:-Laying
C:-Fraying
D:-In lays
Ans: D
82:-The length and width of a fabric is called .
A:-Grain B:-Gauge
C:-Wrap D:-Weft
Ans: A
83:-Drawing sketch of a garment by actual size
A:-Draping
B:-Laying
C:-Designing
D:-Drafting
Ans: D
84:-When does the opening is overlapped?
A:-Slit
B:-Welt
C:-Vent
D:-None of these
Ans: C
85:-Peter pan is a variation of _______ collar.
A:-Tennis
B:-Flat
C:-Stand
D:-Mandarian
Ans: B
86:-What is the approximate width of single width fabric?
A:-110 cm B:-112 cm C:-92 cm D:-132 cm
Ans: C
87:-The cotton material after going through a chemical process become more lustrous
A:-Mercerised
B:-Shrinking
C:-Sizing
D:-Dyeing
Ans: A
88:-Measure on nape to waist
A:-Full length
B:-Natural waist
C:-Waist level
D:-Waist round
Ans: B
89:- ______ is also called as ''L'' - square.
A:-Set square
B:-Pattern square
C:-French square
D:-Tailors square
Ans: D
90:-Fusing means
A:-Melting
B:-Seaming
C:-Darning
D:-Trimming
Ans: A
91:-After the spreading
A:-Pattern making B:-Pattern layout
C:-Pattern drafting D:-Pattern cutting
Ans: B
92:-Which machine used for top stitching?
A:-Zig Zag B:-Bartack
C:-Double needle D:-Chain stitch
Ans: C
93:-Woven fabrics are produced by the _____ of yarns.
A:-Inter looping B:-Over looping C:-Over locking D:-Inter lacing
Ans: D
94:-The diagonal joining of two edges at the corner is called
A:-Mitring
B:-Banding
C:-Binding
D:-Mending
Ans: A
95:-Suitable fabrics are used in draping techniques
A:-Velvet
B:-Nylon
C:-Muslin
D:-Khaki
Ans: C
96:-The marked patterns layout on fabric is known as .
A:-Pattern chart
B:-Pattern grading
C:-Marker
D:-Marking
Ans: C
97:-Grain line will indicate the direction
A:-Weft yarn
B:-Warp yarn
C:-Bias yarn
D:-Width yarn
Ans: B
98:- ________ can be defined as a model of various component of a garment.
A:-Design
B:-Sketch
C:-Style
D:-Pattern
Ans: D
99:-Select the sleeve with lower edge flare
A:-Bell sleeve
B:-Plain sleeve
C:-Kimono sleeve
D:-Cape sleeve
Ans: A
100:-Another name of needle plate .
A:-Face plate
B:-Side plate
C:-Throat plate
D:-Slide plate
Ans: C
A:-Layout
B:-Laying
C:-Fraying
D:-In lays
Ans: D
82:-The length and width of a fabric is called .
A:-Grain B:-Gauge
C:-Wrap D:-Weft
Ans: A
83:-Drawing sketch of a garment by actual size
A:-Draping
B:-Laying
C:-Designing
D:-Drafting
Ans: D
84:-When does the opening is overlapped?
A:-Slit
B:-Welt
C:-Vent
D:-None of these
Ans: C
85:-Peter pan is a variation of _______ collar.
A:-Tennis
B:-Flat
C:-Stand
D:-Mandarian
Ans: B
86:-What is the approximate width of single width fabric?
A:-110 cm B:-112 cm C:-92 cm D:-132 cm
Ans: C
87:-The cotton material after going through a chemical process become more lustrous
A:-Mercerised
B:-Shrinking
C:-Sizing
D:-Dyeing
Ans: A
88:-Measure on nape to waist
A:-Full length
B:-Natural waist
C:-Waist level
D:-Waist round
Ans: B
89:- ______ is also called as ''L'' - square.
A:-Set square
B:-Pattern square
C:-French square
D:-Tailors square
Ans: D
90:-Fusing means
A:-Melting
B:-Seaming
C:-Darning
D:-Trimming
Ans: A
91:-After the spreading
A:-Pattern making B:-Pattern layout
C:-Pattern drafting D:-Pattern cutting
Ans: B
92:-Which machine used for top stitching?
A:-Zig Zag B:-Bartack
C:-Double needle D:-Chain stitch
Ans: C
93:-Woven fabrics are produced by the _____ of yarns.
A:-Inter looping B:-Over looping C:-Over locking D:-Inter lacing
Ans: D
94:-The diagonal joining of two edges at the corner is called
A:-Mitring
B:-Banding
C:-Binding
D:-Mending
Ans: A
95:-Suitable fabrics are used in draping techniques
A:-Velvet
B:-Nylon
C:-Muslin
D:-Khaki
Ans: C
96:-The marked patterns layout on fabric is known as .
A:-Pattern chart
B:-Pattern grading
C:-Marker
D:-Marking
Ans: C
97:-Grain line will indicate the direction
A:-Weft yarn
B:-Warp yarn
C:-Bias yarn
D:-Width yarn
Ans: B
98:- ________ can be defined as a model of various component of a garment.
A:-Design
B:-Sketch
C:-Style
D:-Pattern
Ans: D
99:-Select the sleeve with lower edge flare
A:-Bell sleeve
B:-Plain sleeve
C:-Kimono sleeve
D:-Cape sleeve
Ans: A
100:-Another name of needle plate .
A:-Face plate
B:-Side plate
C:-Throat plate
D:-Slide plate
Ans: C