PRINTING TECHNOLOGY
PRINTING TECHNOLOGY SYLLABUS
(These syllabus may change from time to time. Please check with the relevant Public Service Commission websites for any changes in the syllabus)
- Fundamentals of Printing
- Computer applications
- Products
- Digital Imaging
- Digital Work Flow
- Imposition
- CTP
- Pre-press work and commercial Printing
- Press Processes and Techniques
- Post-Press Processes and Techniques
- Colour /Photo Reproduction
- Project preparation
- Personality Development
Subscription to Printing Technology MCQs
The printing technology MCQs are available for subscription now:
The following pages are accessible:
If you are interested pls email to [email protected]
The following pages are accessible:
- Printing Technology - 10
- Printing Technology- Page 1 -100
- Printing Technology- Page 2 -100
- Printing Technology- Page 3 -100
- Printing Technology- Page 4 -100
- Printing Technology- Page 5- 100
- Printing Technology- Page 6 -100
- Printing Technology- Page 7 - 100
- Printing Technology- Page 8 - 100
- Printing Technology- Page 9 -100
- Printing Technology- Page 10 -33
If you are interested pls email to [email protected]
PRINTING TECHNOLOGY MCQs
1. The quality of fluidity of the printing machine rollers and quick solidification of ink is termed as
A:-flow
B:-drying
C:-thixotrophy
D:-set-off
Correct Answer:- Option-C
2. Which of the following additive will improve the rub resistance of ink ?
A:-resin
B:-wax
C:-drier
D:-extenders
Correct Answer:- Option-B
3. The colour appears to run, the fountain solution and dampening rollers become tinted - Bleeding is caused due to
A:-excessive driers
B:-insufficient water at the plate
C:-the pigment is hydrophilic
D:-insufficient water at the plate
Correct Answer:- Option-C
4. Yellow is often printed above the magenta and cyan but if opaque yellow is used the order of yellow printing is
A:-first colour
B:-second colour
C:-third colour
D:-fourth colour
Correct Answer:- Option-A
5. The release of individual small fibers, particles from paper surfaces is termed as
A:-Greasing
B:-Fluffing
C:-Strippring
D:-Tinting
Correct Answer:- Option-B
6. The machine that prints both sides of the sheet in one pass through the press is
A:-Common impression cylinder
B:-Inline press
C:-Narrow web press
D:-Blanket to blanket press
Correct Answer:- Option-D
7. This device in the web offset machine is used to change the direction of the web.
A:-roller
B:-festoon
C:-kicker
D:-turner bar
Correct Answer:- Option-D
8. The inks that are formulated to dry primarily by evaporation of solvent at high temperature
A:-Quick set ink
B:-Heat set ink
C:-UV ink
D:-All the above
Correct Answer:- Option-B
9. 17 `1/2`” × 23 `1/2`” sized paper is termed as
A:-Crown
B:-Royal
C:-Demmy
D:-Foolscape
Correct Answer:- Option-C
10. A condition of ink, when left in a container, thicken and form a light gel structure on the top layer
A:-thixotrophy
B:-rheology
C:-newtonion
D:-tinting
Correct Answer:- Option-A
A:-flow
B:-drying
C:-thixotrophy
D:-set-off
Correct Answer:- Option-C
2. Which of the following additive will improve the rub resistance of ink ?
A:-resin
B:-wax
C:-drier
D:-extenders
Correct Answer:- Option-B
3. The colour appears to run, the fountain solution and dampening rollers become tinted - Bleeding is caused due to
A:-excessive driers
B:-insufficient water at the plate
C:-the pigment is hydrophilic
D:-insufficient water at the plate
Correct Answer:- Option-C
4. Yellow is often printed above the magenta and cyan but if opaque yellow is used the order of yellow printing is
A:-first colour
B:-second colour
C:-third colour
D:-fourth colour
Correct Answer:- Option-A
5. The release of individual small fibers, particles from paper surfaces is termed as
A:-Greasing
B:-Fluffing
C:-Strippring
D:-Tinting
Correct Answer:- Option-B
6. The machine that prints both sides of the sheet in one pass through the press is
A:-Common impression cylinder
B:-Inline press
C:-Narrow web press
D:-Blanket to blanket press
Correct Answer:- Option-D
7. This device in the web offset machine is used to change the direction of the web.
A:-roller
B:-festoon
C:-kicker
D:-turner bar
Correct Answer:- Option-D
8. The inks that are formulated to dry primarily by evaporation of solvent at high temperature
A:-Quick set ink
B:-Heat set ink
C:-UV ink
D:-All the above
Correct Answer:- Option-B
9. 17 `1/2`” × 23 `1/2`” sized paper is termed as
A:-Crown
B:-Royal
C:-Demmy
D:-Foolscape
Correct Answer:- Option-C
10. A condition of ink, when left in a container, thicken and form a light gel structure on the top layer
A:-thixotrophy
B:-rheology
C:-newtonion
D:-tinting
Correct Answer:- Option-A
TANCET OLD QUESTION PAPER- PRINTING TECHNOLOGY
1. TANCET Printing Technology- Question Paper 2016
2. TANCET Printing Technology- Question Paper 2017
2. TANCET Printing Technology- Question Paper 2017
- Printing Technology - 10
- Printing Technology- Page 1 -100
- Printing Technology- Page 2 -100
- Printing Technology- Page 3 -100
- Printing Technology- Page 4 -100
- Printing Technology- Page 5- 100
- Printing Technology- Page 6 -100
- Printing Technology- Page 7 - 100
- Printing Technology- Page 8 - 100
- Printing Technology- Page 9 -100
- Printing Technology- Page 10 -100
- Printing Technology- Page 11