PRINTING TECHNOLOGY- PAGE 9
PRINTING TECHNOLOGY MCQs- PAGE 9
1. Which of the following is not a statutory welfare facility under Factory Act 1948 ?
(A) First Aid Box (B) Transport
(C) Canteen (D) Shelter and Lunch room
Ans: B
2. In inventory management; insurance & tax cost comes under –
(A) Set up cost (B) Inventory carrying cost
(C) Cost of ordering (D) Cost of shortage
Ans: B
3. In scanning PMT refers to _______
(A) Positive Multiplier Tube (B) Phase Multiplier Tube
(C) Photo Moisture Tube (D) Photo Multiplier Tube
Ans: D
4. If paper is not dimensionally stable it will cause which of the following defect ?
(A) Hickies (B) Scum
(C) Piling (D) Mis registration
Ans: D
5. Which of the following is not a function of Government press ?
(A) Printing annual report of private companies
(B) Printing state Government budget
(C) Printing of service book
(D) Procurement of stationery & paper for Government departments
Ans: A
6. Which of the following is flexible packaging material ?
(A) Glass (B) Tin
(C) Plastic film (D) Wood
Ans: C
7. Which of the following makes dampening solution acidic _______
(A) Gum arabic (B) Isopropyl alcohol
(C) Lime water (D) Paper lint / fluff
Ans: A
8. Which of the following imposition scheme is used in perfecting printing to change the directions of sheet ?
(A) Work and tumble (B) Work and turn
(C) Work and twist (D) Work and triple
Ans: A
9. The inking rollers which are in direct contact with plate, on an offset machine are called as –
(A) Pin rollers (B) Fountain rollers
(C) Pan rollers (D) Forme rollers
Ans: D
10. Arrangement on sheet fed offset printing machine to print on both sides of paper in one pass is called as –
(A) Perforating (B) Offsetting
(C) Pressing (D) Perfecting
Ans: D
11. The stickiness of ink is also known as –
(A) Stack (B) Tack
(C) Lack (D) Dye
Ans: B
12. The process of comparing accuracy of an instrument with a known and proven standard, is known as –
(A) Migration (B) Calibration
(C) Calendering (D) Prefixing
Ans: B
13. Accurate overprinting of individual colour separations is known as _______
(A) Spotting (B) Scumming
(C) Register (D) Mottling
Ans: C
14. Which of the following is standard observer angel of viewing –
(A) 12° (B) 10°
(C) 8° (D) 20°
Ans: B
15. In news paper printing web offset machine first fold is called –
(A) Former fold (B) Jaw fold
(C) Chopper fold (D) Buckle fold
Ans: A
16. How many boards will be there in 2 gross boards ?
(A) 2000 (B) 1000
(C) 144 (D) 288
Ans: D
17. The method to make multiple identical images on a single plate with one film master is called as –
(A) Trapping (B) Bimetal plate
(C) Step and repeat (D) Perforating
Ans: C
18. Which of the following tests is performed to find amount of water absorbed by paper ?
(A) Cobb test (B) Zahn cup test
(C) Bursting strength test (D) Ash test
Ans: A
19. In relation to Drum scanner; PMT stands for –
(A) Photo Minus Tube (B) Pixel Minus Tube
(C) Photo Multiplier Tube (D) Photo Minus Triode
Ans: C
20. Printer quotes price of the job by using which of the following formula ?
(A) Price = cost + loss (B) Price = cost + profit
(C) Price = cost – profit (D) Price = profit + loss
Ans: B
21. Which of the following is not a part of a cutting machine ?
(A) Back gauge (B) Knife
(C) Glue pot (D) Pressure clamp
Ans: C
22. Which cup of the following is used to measure viscosity of ink ?
(A) Zahn (B) Kahn
(C) Pahn (D) Vahn
Ans: A
23. In which configuration of printing machine, the printing units are placed one above the other ?
(A) Stack (B) CIC
(C) B to B (D) In line
Ans: A
24. Smooth metal rings present at the extreme ends of plate cylinder as called as –
(A) Under cut (B) Cut off
(C) Gutter (D) Bearer
Ans: D
25. In digital customised printing VDP stands for –
(A) Vast Data Printing (B) Vague Data Printing
(C) Variable Data Printing (D) Valuable Data Printing
Ans: C
26. According to Gujarat purchase policy 2016, how much non refundable registration fee is required for micro & small industries in Gujarat state ?
(A) INR 15000 (B) INR 50000
(C) INR 10000 (D) INR 5000
Ans: A
27. In buckle folding principle _______ folds are formed.
(A) Parallel (B) Perpendicular
(C) Slanting (D) None of the above
Ans: A
28. What is the function of red filter in colour separation process ?
(A) Transmit Blue, absorb Red & Green (B) Transmit Green, absorb Red & Blue
(C) Transmit Red, absorb Blue & Green (D) Absorb Red, Green & Blue
Ans: C
29. Which of the following is used as quality control aid in printing ?
(A) Grey scale (B) Colour control bar
(C) Star target (D) All of the above
Ans: D
30. ATM receipts are example of –
(A) Screen printing (B) Digital printing
(C) Flexo graphic printing (D) Anilox printing
Ans: B
31. In packaging _______ is the process of joining two flexible packaging webs by using a bonding agent.
(A) Lamination (B) Varnishing
(C) Corona treatment (D) Printing
Ans: A
32. As per Gujarat purchase policy 2016, if tender is invited with ‘TOC’ clause the evaluation shall be done accordingly and ‘TOC’ stands for
(A) Title of Cost (B) Total Operating Cost
(C) Total Opportunity Cost (D) Total Owing Cost
Ans: D
33. The property of paper to resist the mechanical stress of the ink transfer is called _______
(A) Tear resistance (B) Water resistance
(C) Pick resistance (D) Heat resistance
Ans: C
34. Which of the following gases is used in food packaging ?
(A) Sulphur dioxide (B) Carbon dioxide
(C) Oxygen (D) Nitrogen
Ans: D
35. _______ is the alignment of fibers perpendicular to the cylinder.
(A) Long grain (B) Short grain
(C) Medium thick grain (D) Extra thick grain
Ans: B
36. Designs prepared using coreldraw software are in _______ format.
(A) RIP (B) BITMAP
(C) RASTER (D) VECTOR
Ans: D
37. Which of the following is the cheapest pulp –
(A) Chemical pulp (B) Mechanical pulp
(C) Semi chemical pulp (D) Sulphite pulp
Ans: B
38. On a web fed machine Which of the following device is used to control web tension ?
(A) Pyramid roller (B) Ductor roller
(C) Anilox Roller (D) Dancer roller
Ans: D
39. In inventory management EOQ stands for _______
(A) Economic Optional Quantity (B) Economic Only Quantity
(C) Economic Order Quantity (D) Equal Order Quantity
Ans: C
40. In Factories Act 1948, section 2(K) defines –
(A) Worker (B) Occupants
(C) Manufacturing process (D) Factory
Ans: C
41. Which of the following is a security feature used on currency note ?
(A) Micro lettering (B) Water mark
(C) See through register (D) All of the above
Ans: D
42. Which of the following is not a part of preventive maintenance ?
(A) Lubrication
(B) Regular cleaning
(C) Checking vibrations, sounds from machine
(D) None of the above
Ans: D
43. Presence of air during exposure may result in –
(A) Under exposure of the film (B) Newton’s ring formation
(C) No exposure (D) Damaging the film element
Ans: B
44. Colour temperature of day light is approximately –
(A) 6000° K (B) 6400° K
(C) 6800° K (D) 5000° K
Ans: B
45. For text setting and pagination of a book _______ software is used.
(A) Corel draw (B) Pagemaker
(C) Photoshop (D) Artios CAD
Ans: B
46. The process of pressing paper between heavy rolls in paper making machine is called as _______
(A) Bleaching (B) Pulping
(C) Calendering (D) Mapping
Ans: C
47. Application of gum solution after development of plate gives storage resistant hydrophilic properties to the _______ areas on the plate.
(A) Non image (B) Image
(C) Both (A) and (B) (D) None of the above
Ans: A
48. The two inside sheets that hold the case bound cover to the body of the book are called –
(A) Start sheets (B) Covers
(C) Duotone sheets (D) End sheets
Ans: D
49. Water base varnish is made up of _______
(A) Sulphuric Acid (B) Polyethylene Tetraphthalate
(C) Polymer dispersion (D) None of the above
Ans: C
50. Gripper margin on substrate is _______ area.
(A) Hot (B) Sticky
(C) Printing (D) Non printing
Ans: D
(A) First Aid Box (B) Transport
(C) Canteen (D) Shelter and Lunch room
Ans: B
2. In inventory management; insurance & tax cost comes under –
(A) Set up cost (B) Inventory carrying cost
(C) Cost of ordering (D) Cost of shortage
Ans: B
3. In scanning PMT refers to _______
(A) Positive Multiplier Tube (B) Phase Multiplier Tube
(C) Photo Moisture Tube (D) Photo Multiplier Tube
Ans: D
4. If paper is not dimensionally stable it will cause which of the following defect ?
(A) Hickies (B) Scum
(C) Piling (D) Mis registration
Ans: D
5. Which of the following is not a function of Government press ?
(A) Printing annual report of private companies
(B) Printing state Government budget
(C) Printing of service book
(D) Procurement of stationery & paper for Government departments
Ans: A
6. Which of the following is flexible packaging material ?
(A) Glass (B) Tin
(C) Plastic film (D) Wood
Ans: C
7. Which of the following makes dampening solution acidic _______
(A) Gum arabic (B) Isopropyl alcohol
(C) Lime water (D) Paper lint / fluff
Ans: A
8. Which of the following imposition scheme is used in perfecting printing to change the directions of sheet ?
(A) Work and tumble (B) Work and turn
(C) Work and twist (D) Work and triple
Ans: A
9. The inking rollers which are in direct contact with plate, on an offset machine are called as –
(A) Pin rollers (B) Fountain rollers
(C) Pan rollers (D) Forme rollers
Ans: D
10. Arrangement on sheet fed offset printing machine to print on both sides of paper in one pass is called as –
(A) Perforating (B) Offsetting
(C) Pressing (D) Perfecting
Ans: D
11. The stickiness of ink is also known as –
(A) Stack (B) Tack
(C) Lack (D) Dye
Ans: B
12. The process of comparing accuracy of an instrument with a known and proven standard, is known as –
(A) Migration (B) Calibration
(C) Calendering (D) Prefixing
Ans: B
13. Accurate overprinting of individual colour separations is known as _______
(A) Spotting (B) Scumming
(C) Register (D) Mottling
Ans: C
14. Which of the following is standard observer angel of viewing –
(A) 12° (B) 10°
(C) 8° (D) 20°
Ans: B
15. In news paper printing web offset machine first fold is called –
(A) Former fold (B) Jaw fold
(C) Chopper fold (D) Buckle fold
Ans: A
16. How many boards will be there in 2 gross boards ?
(A) 2000 (B) 1000
(C) 144 (D) 288
Ans: D
17. The method to make multiple identical images on a single plate with one film master is called as –
(A) Trapping (B) Bimetal plate
(C) Step and repeat (D) Perforating
Ans: C
18. Which of the following tests is performed to find amount of water absorbed by paper ?
(A) Cobb test (B) Zahn cup test
(C) Bursting strength test (D) Ash test
Ans: A
19. In relation to Drum scanner; PMT stands for –
(A) Photo Minus Tube (B) Pixel Minus Tube
(C) Photo Multiplier Tube (D) Photo Minus Triode
Ans: C
20. Printer quotes price of the job by using which of the following formula ?
(A) Price = cost + loss (B) Price = cost + profit
(C) Price = cost – profit (D) Price = profit + loss
Ans: B
21. Which of the following is not a part of a cutting machine ?
(A) Back gauge (B) Knife
(C) Glue pot (D) Pressure clamp
Ans: C
22. Which cup of the following is used to measure viscosity of ink ?
(A) Zahn (B) Kahn
(C) Pahn (D) Vahn
Ans: A
23. In which configuration of printing machine, the printing units are placed one above the other ?
(A) Stack (B) CIC
(C) B to B (D) In line
Ans: A
24. Smooth metal rings present at the extreme ends of plate cylinder as called as –
(A) Under cut (B) Cut off
(C) Gutter (D) Bearer
Ans: D
25. In digital customised printing VDP stands for –
(A) Vast Data Printing (B) Vague Data Printing
(C) Variable Data Printing (D) Valuable Data Printing
Ans: C
26. According to Gujarat purchase policy 2016, how much non refundable registration fee is required for micro & small industries in Gujarat state ?
(A) INR 15000 (B) INR 50000
(C) INR 10000 (D) INR 5000
Ans: A
27. In buckle folding principle _______ folds are formed.
(A) Parallel (B) Perpendicular
(C) Slanting (D) None of the above
Ans: A
28. What is the function of red filter in colour separation process ?
(A) Transmit Blue, absorb Red & Green (B) Transmit Green, absorb Red & Blue
(C) Transmit Red, absorb Blue & Green (D) Absorb Red, Green & Blue
Ans: C
29. Which of the following is used as quality control aid in printing ?
(A) Grey scale (B) Colour control bar
(C) Star target (D) All of the above
Ans: D
30. ATM receipts are example of –
(A) Screen printing (B) Digital printing
(C) Flexo graphic printing (D) Anilox printing
Ans: B
31. In packaging _______ is the process of joining two flexible packaging webs by using a bonding agent.
(A) Lamination (B) Varnishing
(C) Corona treatment (D) Printing
Ans: A
32. As per Gujarat purchase policy 2016, if tender is invited with ‘TOC’ clause the evaluation shall be done accordingly and ‘TOC’ stands for
(A) Title of Cost (B) Total Operating Cost
(C) Total Opportunity Cost (D) Total Owing Cost
Ans: D
33. The property of paper to resist the mechanical stress of the ink transfer is called _______
(A) Tear resistance (B) Water resistance
(C) Pick resistance (D) Heat resistance
Ans: C
34. Which of the following gases is used in food packaging ?
(A) Sulphur dioxide (B) Carbon dioxide
(C) Oxygen (D) Nitrogen
Ans: D
35. _______ is the alignment of fibers perpendicular to the cylinder.
(A) Long grain (B) Short grain
(C) Medium thick grain (D) Extra thick grain
Ans: B
36. Designs prepared using coreldraw software are in _______ format.
(A) RIP (B) BITMAP
(C) RASTER (D) VECTOR
Ans: D
37. Which of the following is the cheapest pulp –
(A) Chemical pulp (B) Mechanical pulp
(C) Semi chemical pulp (D) Sulphite pulp
Ans: B
38. On a web fed machine Which of the following device is used to control web tension ?
(A) Pyramid roller (B) Ductor roller
(C) Anilox Roller (D) Dancer roller
Ans: D
39. In inventory management EOQ stands for _______
(A) Economic Optional Quantity (B) Economic Only Quantity
(C) Economic Order Quantity (D) Equal Order Quantity
Ans: C
40. In Factories Act 1948, section 2(K) defines –
(A) Worker (B) Occupants
(C) Manufacturing process (D) Factory
Ans: C
41. Which of the following is a security feature used on currency note ?
(A) Micro lettering (B) Water mark
(C) See through register (D) All of the above
Ans: D
42. Which of the following is not a part of preventive maintenance ?
(A) Lubrication
(B) Regular cleaning
(C) Checking vibrations, sounds from machine
(D) None of the above
Ans: D
43. Presence of air during exposure may result in –
(A) Under exposure of the film (B) Newton’s ring formation
(C) No exposure (D) Damaging the film element
Ans: B
44. Colour temperature of day light is approximately –
(A) 6000° K (B) 6400° K
(C) 6800° K (D) 5000° K
Ans: B
45. For text setting and pagination of a book _______ software is used.
(A) Corel draw (B) Pagemaker
(C) Photoshop (D) Artios CAD
Ans: B
46. The process of pressing paper between heavy rolls in paper making machine is called as _______
(A) Bleaching (B) Pulping
(C) Calendering (D) Mapping
Ans: C
47. Application of gum solution after development of plate gives storage resistant hydrophilic properties to the _______ areas on the plate.
(A) Non image (B) Image
(C) Both (A) and (B) (D) None of the above
Ans: A
48. The two inside sheets that hold the case bound cover to the body of the book are called –
(A) Start sheets (B) Covers
(C) Duotone sheets (D) End sheets
Ans: D
49. Water base varnish is made up of _______
(A) Sulphuric Acid (B) Polyethylene Tetraphthalate
(C) Polymer dispersion (D) None of the above
Ans: C
50. Gripper margin on substrate is _______ area.
(A) Hot (B) Sticky
(C) Printing (D) Non printing
Ans: D
51. As per Gujarat purchase policy 2016, bid currency should be _______ only
(A) US Dollar (B) Indian National Rupee
(C) UK Pound (D) UAE Dirham
Ans: B
52. If two screens are randomly positioned over each other, an objectionable pattern will be –
(A) Hybrid pattern (B) AM / FM pattern
(C) Moire pattern (D) None of the above
Ans: C
53. The printing impression imparted is maximum in –
(A) Litho offset (B) Letter press
(C) Flexography (D) Gravure
Ans: C
54. As per Factories Act 1948, appointment of qualified safety officer is done, when the No. of worker employed are more than –
(A) 5000 (B) 1000
(C) 7000 (D) 10000
Ans: B
55. Study of flow & deformation behaviour of liquid, solid or gaseous substances is called as –
(A) Rastering (B) Rheology
(C) Scanning (D) Screening
Ans: B
56. Defect in print appearing as speaks surrounded by an unprinted “Halo” caused by foreign object is called as –
(A) Hickies (B) Tinting
(C) Moire (D) Mis registration
Ans: A
57. According to Factory Act 1948, ‘Day’ means a period of _______
(A) 12 hours beginning at midnight (B) 24 hours beginning at midnight
(C) 12 hours beginning at noon (D) 24 hours beginning at noon
Ans: B
58. What acts as a catalyst for increasing the rate of ink drying –
(A) Drier (B) Dye
(C) Wax (D) Cellulose
Ans: A
59. Complimentary colour schemes on a colour wheel are known for offering –
(A) High contrast (B) Harmony in design
(C) Bothe (A) & (B) (D) Only a combination of colour
Ans: A
60. Which of the following is extension of Illustrator file ?
(A) .AI (B) .AS
(C) .AR (D) .ALL
Ans: A
61. The unit of measurement of conductivity of dampening solution is –
(A) Micro volt per cm (B) Micro ohm per cm
(C) Micro mho per cm (D) Micro kg per cm
Ans: C
62. For packaging of milk which of the following packaging method is used –
(A) Utility packaging (B) Shrink packaging
(C) Blister packaging (D) Aseptic packaging
Ans: D
63. What is the full form of EMD in the process of tendering –
(A) Equal Money Deposit (B) Early Money Deposit
(C) Earnest Money Deposit (D) Eager Money Deposit
Ans: C
64. In processing positive working plates which area is removed _______
(A) Non exposed (B) Exposed
(C) Screened (D) None of the above
Ans: B
65. The unit of measurement of viscosity of printing ink is _______
(A) Pixel.cm (B) Pascal.second
(C) Pascal.millimeter (D) Pixel.second
Ans: B
66. The screening in which individual dots are spaced at same distance but they have different diameter, is called –
(A) Frequency modulation (B) Amplitude modulation
(C) Format modulation (D) Alternate modulation
Ans: B
67. As per Industrial Dispute Act 1947, temporary closing a place of employment or suspension of work or refusal by an employer to continue to employ any number of persons employed by him means –
(A) Retrenchment (B) Strike
(C) Lock out (D) Gherao
Ans: C
68. Red ball image printed on white paper by offset process, is an example of which colour theory ?
(A) Additive colour theory (B) Subtractive colour theory
(C) Masking theory (D) None of the above
Ans: B
69. For rigid original which of the following scanner is used --
(A) Internal drum scanner (B) External drum scanner
(C) Flat Bed scanner (D) All of the above
Ans: C
70. Which of the following are elements of cost ?
(A) Labour (B) Material and out work
(C) Expenses and overheads (D) All of the above
Ans: D
71. Starting from shorter wave length to longer wavelength range, which is the correct sequence –
(A) UV, IR, VISIBLE (B) VISIBLE, IR, UV
(C) UV, VISIBLE, IR (D) None of the above
Ans: C
72. The instrument to check the water conductivity is called _______
(A) Conductivity meter (B) Gravity meter
(C) Photo meter (D) Duro meter
Ans: A
73. Inks that change colour with change in temperature are called –
(A) Pressure sensitive inks (B) Isochromic ink
(C) Thermochromic ink (D) UCR ink
Ans: C
74. MICR cheques are printed by using –
(A) Magenta ink (B) Moist ink
(C) Magnetic ink (D) None of the above
Ans: C
75. In organisation authority always flows from –
(A) Subordinate to Superior (B) Subordinate to Subordinate
(C) Superior to Subordinate (D) None of the above
Ans: C
76. Which of the following is not an optical property of paper ?
(A) Colour (B) Brightness
(C) Opacity (D) Grain direction
Ans: D
77. In frequency modulated screening technique, the dot size –
(A) Is extra large (B) Is small
(C) Remains CONSTANT (D) Changes
Ans: C
78. The cloudy appearance of ink on substrate is called as _______
(A) Splicing (B) Mottling
(C) Scumming (D) Set off
Ans: B
79. Wood fiber consists of
(A) Cellulose, Hemicellulose, Lignin (B) Only lignin
(C) Cellulose & Hemicellulose, Casein (D) Only Cellulose
Ans: A
80. _______ is defined as the vertical distance between one base line and next ; measured in points.
(A) Line spacing (B) Graphic design
(C) X-height (D) Decender
Ans: A
81. In heatset web offset printing machine chillers are located _______ dryers.
(A) Inside (B) In line with
(C) Before (D) After
Ans: D
82. In CIE lab colour space : L denotes the lightness from _______
(A) White (0) to Black (100) (B) Black (0) to White (100)
(C) Black (50) to White (70) (D) Grey (20) to Black (100)
Ans: B
83. The image on an offset plate will walk away if the pH of the fountain solution is _______
(A) Between 8-9 (B) Between 6-7
(C) Between 5-6 (D) Between 3-4
Ans: D
84. For packaging of tablets and capsules, which of the following packaging method is used popularly for primary packaging ?
(A) Aseptic packaging (B) Vacuum packaging
(C) Blister packaging (D) Shrink packaging
Ans: C
85. Which of the following is important for accurate registration in multicolour screen printing.
(A) Solvent used (B) Screen tension
(C) Ink used (D) Emulsion ratio
Ans: B
86. In which type of flexographic inking system, Two doctor blades are used –
(A) Fountain inking (B) Anilox inking
(C) Chambered doctor blade inking (D) Reverse angle inking
Ans: C
87. In _______ the paper web is fed in short grain direction only.
(A) Sheet fed offset machine (B) Web fed offset machine
(C) Letterpress machine (D) Screen printing machine
Ans: B
88. Internal and External are types of _______ scanner.
(A) Drum (B) Flat Bed
(C) Capstan (D) None of the above
Ans: A
89. What is the unit of measurement of surface tension of dampening solution ?
(A) Kg/s (B) Dyne/cm
(C) Delta (D) Degree kelvin
Ans: B
90. Coating unit with chambered doctor blade and screen roller is also known as _______
(A) Screen printing unit (B) Flexo printing unit
(C) Intaglio printing unit (D) Hybrid printing unit
Ans: B
91. In flexography anilox roller has _______ cells to store ink before transferring it to plate.
(A) Recessed (B) Radioactive
(C) Frequency modulated (D) Amplitude modulated
Ans: A
92. FFS machines are used in packaging; what is the full form of FFS –
(A) Form Fill Seal (B) Fill Form Seal
(C) Form Fetch Side (D) Fill Full Stock
Ans: A
93. Adobe creative suite does not contain which of the following –
(A) Illustrator (B) Indesign
(C) Photoshop (D) Coreldraw
Ans: D
94. In which process of screen making, screen covered with light sensitive emulsion and exposed with film –
(A) Perfect (B) Imaging
(C) Indirect (D) Direct
Ans: D
95. Former fold on web machine is _______ to grain direction of the substrate.
(A) Cutting (B) Diagonal
(C) Perpendicular (D) Parallel
Ans: D
96. Which of the following is used as colorant in printing ink –
(A) Solvent (B) Varnish
(C) Pigment / dyes (D) Drievs
Ans: C
97. As per Gujarat Purchase Policy 2016, for which non engineering items, vendor registration is not required.
(A) Stationery (B) Cotton waste
(C) M.S. Bolt & Nuts (D) All of the above
Ans: A
98. A photographic film known for high contrast, high quality with orthochromatic dyed emulsion is –
(A) Orthochromatic film (B) Panchromatic film
(C) Rapid access film (D) Lith film
Ans: D
99. The photoreceptors in one eye which operates at low levels of light are _______
(A) Cones (B) Rods
(C) Cones and Rods (D) Retina
Ans: B
100. Forecast of sale price before the job execution is called –
(A) Estimating (B) Expectation
(C) Editing (D) Routing
Ans: A
(A) US Dollar (B) Indian National Rupee
(C) UK Pound (D) UAE Dirham
Ans: B
52. If two screens are randomly positioned over each other, an objectionable pattern will be –
(A) Hybrid pattern (B) AM / FM pattern
(C) Moire pattern (D) None of the above
Ans: C
53. The printing impression imparted is maximum in –
(A) Litho offset (B) Letter press
(C) Flexography (D) Gravure
Ans: C
54. As per Factories Act 1948, appointment of qualified safety officer is done, when the No. of worker employed are more than –
(A) 5000 (B) 1000
(C) 7000 (D) 10000
Ans: B
55. Study of flow & deformation behaviour of liquid, solid or gaseous substances is called as –
(A) Rastering (B) Rheology
(C) Scanning (D) Screening
Ans: B
56. Defect in print appearing as speaks surrounded by an unprinted “Halo” caused by foreign object is called as –
(A) Hickies (B) Tinting
(C) Moire (D) Mis registration
Ans: A
57. According to Factory Act 1948, ‘Day’ means a period of _______
(A) 12 hours beginning at midnight (B) 24 hours beginning at midnight
(C) 12 hours beginning at noon (D) 24 hours beginning at noon
Ans: B
58. What acts as a catalyst for increasing the rate of ink drying –
(A) Drier (B) Dye
(C) Wax (D) Cellulose
Ans: A
59. Complimentary colour schemes on a colour wheel are known for offering –
(A) High contrast (B) Harmony in design
(C) Bothe (A) & (B) (D) Only a combination of colour
Ans: A
60. Which of the following is extension of Illustrator file ?
(A) .AI (B) .AS
(C) .AR (D) .ALL
Ans: A
61. The unit of measurement of conductivity of dampening solution is –
(A) Micro volt per cm (B) Micro ohm per cm
(C) Micro mho per cm (D) Micro kg per cm
Ans: C
62. For packaging of milk which of the following packaging method is used –
(A) Utility packaging (B) Shrink packaging
(C) Blister packaging (D) Aseptic packaging
Ans: D
63. What is the full form of EMD in the process of tendering –
(A) Equal Money Deposit (B) Early Money Deposit
(C) Earnest Money Deposit (D) Eager Money Deposit
Ans: C
64. In processing positive working plates which area is removed _______
(A) Non exposed (B) Exposed
(C) Screened (D) None of the above
Ans: B
65. The unit of measurement of viscosity of printing ink is _______
(A) Pixel.cm (B) Pascal.second
(C) Pascal.millimeter (D) Pixel.second
Ans: B
66. The screening in which individual dots are spaced at same distance but they have different diameter, is called –
(A) Frequency modulation (B) Amplitude modulation
(C) Format modulation (D) Alternate modulation
Ans: B
67. As per Industrial Dispute Act 1947, temporary closing a place of employment or suspension of work or refusal by an employer to continue to employ any number of persons employed by him means –
(A) Retrenchment (B) Strike
(C) Lock out (D) Gherao
Ans: C
68. Red ball image printed on white paper by offset process, is an example of which colour theory ?
(A) Additive colour theory (B) Subtractive colour theory
(C) Masking theory (D) None of the above
Ans: B
69. For rigid original which of the following scanner is used --
(A) Internal drum scanner (B) External drum scanner
(C) Flat Bed scanner (D) All of the above
Ans: C
70. Which of the following are elements of cost ?
(A) Labour (B) Material and out work
(C) Expenses and overheads (D) All of the above
Ans: D
71. Starting from shorter wave length to longer wavelength range, which is the correct sequence –
(A) UV, IR, VISIBLE (B) VISIBLE, IR, UV
(C) UV, VISIBLE, IR (D) None of the above
Ans: C
72. The instrument to check the water conductivity is called _______
(A) Conductivity meter (B) Gravity meter
(C) Photo meter (D) Duro meter
Ans: A
73. Inks that change colour with change in temperature are called –
(A) Pressure sensitive inks (B) Isochromic ink
(C) Thermochromic ink (D) UCR ink
Ans: C
74. MICR cheques are printed by using –
(A) Magenta ink (B) Moist ink
(C) Magnetic ink (D) None of the above
Ans: C
75. In organisation authority always flows from –
(A) Subordinate to Superior (B) Subordinate to Subordinate
(C) Superior to Subordinate (D) None of the above
Ans: C
76. Which of the following is not an optical property of paper ?
(A) Colour (B) Brightness
(C) Opacity (D) Grain direction
Ans: D
77. In frequency modulated screening technique, the dot size –
(A) Is extra large (B) Is small
(C) Remains CONSTANT (D) Changes
Ans: C
78. The cloudy appearance of ink on substrate is called as _______
(A) Splicing (B) Mottling
(C) Scumming (D) Set off
Ans: B
79. Wood fiber consists of
(A) Cellulose, Hemicellulose, Lignin (B) Only lignin
(C) Cellulose & Hemicellulose, Casein (D) Only Cellulose
Ans: A
80. _______ is defined as the vertical distance between one base line and next ; measured in points.
(A) Line spacing (B) Graphic design
(C) X-height (D) Decender
Ans: A
81. In heatset web offset printing machine chillers are located _______ dryers.
(A) Inside (B) In line with
(C) Before (D) After
Ans: D
82. In CIE lab colour space : L denotes the lightness from _______
(A) White (0) to Black (100) (B) Black (0) to White (100)
(C) Black (50) to White (70) (D) Grey (20) to Black (100)
Ans: B
83. The image on an offset plate will walk away if the pH of the fountain solution is _______
(A) Between 8-9 (B) Between 6-7
(C) Between 5-6 (D) Between 3-4
Ans: D
84. For packaging of tablets and capsules, which of the following packaging method is used popularly for primary packaging ?
(A) Aseptic packaging (B) Vacuum packaging
(C) Blister packaging (D) Shrink packaging
Ans: C
85. Which of the following is important for accurate registration in multicolour screen printing.
(A) Solvent used (B) Screen tension
(C) Ink used (D) Emulsion ratio
Ans: B
86. In which type of flexographic inking system, Two doctor blades are used –
(A) Fountain inking (B) Anilox inking
(C) Chambered doctor blade inking (D) Reverse angle inking
Ans: C
87. In _______ the paper web is fed in short grain direction only.
(A) Sheet fed offset machine (B) Web fed offset machine
(C) Letterpress machine (D) Screen printing machine
Ans: B
88. Internal and External are types of _______ scanner.
(A) Drum (B) Flat Bed
(C) Capstan (D) None of the above
Ans: A
89. What is the unit of measurement of surface tension of dampening solution ?
(A) Kg/s (B) Dyne/cm
(C) Delta (D) Degree kelvin
Ans: B
90. Coating unit with chambered doctor blade and screen roller is also known as _______
(A) Screen printing unit (B) Flexo printing unit
(C) Intaglio printing unit (D) Hybrid printing unit
Ans: B
91. In flexography anilox roller has _______ cells to store ink before transferring it to plate.
(A) Recessed (B) Radioactive
(C) Frequency modulated (D) Amplitude modulated
Ans: A
92. FFS machines are used in packaging; what is the full form of FFS –
(A) Form Fill Seal (B) Fill Form Seal
(C) Form Fetch Side (D) Fill Full Stock
Ans: A
93. Adobe creative suite does not contain which of the following –
(A) Illustrator (B) Indesign
(C) Photoshop (D) Coreldraw
Ans: D
94. In which process of screen making, screen covered with light sensitive emulsion and exposed with film –
(A) Perfect (B) Imaging
(C) Indirect (D) Direct
Ans: D
95. Former fold on web machine is _______ to grain direction of the substrate.
(A) Cutting (B) Diagonal
(C) Perpendicular (D) Parallel
Ans: D
96. Which of the following is used as colorant in printing ink –
(A) Solvent (B) Varnish
(C) Pigment / dyes (D) Drievs
Ans: C
97. As per Gujarat Purchase Policy 2016, for which non engineering items, vendor registration is not required.
(A) Stationery (B) Cotton waste
(C) M.S. Bolt & Nuts (D) All of the above
Ans: A
98. A photographic film known for high contrast, high quality with orthochromatic dyed emulsion is –
(A) Orthochromatic film (B) Panchromatic film
(C) Rapid access film (D) Lith film
Ans: D
99. The photoreceptors in one eye which operates at low levels of light are _______
(A) Cones (B) Rods
(C) Cones and Rods (D) Retina
Ans: B
100. Forecast of sale price before the job execution is called –
(A) Estimating (B) Expectation
(C) Editing (D) Routing
Ans: A
- Printing Technology - 10
- Printing Technology- Page 1 -100
- Printing Technology- Page 2 -100
- Printing Technology- Page 3 -100
- Printing Technology- Page 4 -100
- Printing Technology- Page 5- 100
- Printing Technology- Page 6 -100
- Printing Technology- Page 7 - 100
- Printing Technology- Page 8 - 100
- Printing Technology- Page 9 -100
- Printing Technology- Page 10 -33