SURFACE ORNAMENTATION TECHNIQUE
Surface Ornamentation Technique Syllabus
(These syllabus may change from time to time. Please check with the relevant Public Service Commission websites for any changes in the syllabus)
- Identify and use embroidery tools with safety precautions.
- Prepare sample basic hand stitches (Temporary & permanent stitch).
- Describe & use different types of tracing method carbon paper, tissue paper, tracing paper, water soluble pen, tracing box (light box), hot pressing and wooden block method.
- Demonstrate the basic embroidery stitches flat, loop, crossed, knotted and prepare article.
- Make a Hand kerchief with a free hand (Scribble, Geometrical, Cut Paper or Signature )embroidery design
- Draw, create & place free hand designs with Scribble, Geometrical, Cut Paper or Signature method.
- State & identify the color wheel, describe various types of color, color schemes & use these color schemes in different jobs.
- Demonstrate the Enlarged & Reduced forms of design
- Decorate a garment part with a suitable Embroidery design
- Identify, operate the Zig- Zag machine embroidery parts, demonstrate set the machine for embroidery.
- Make samples with running stitch, running shade, satin, cording, back stitch. Identification and rectification of defects.
- Decorate a cushion cover with embroidery design using Zig Zag Machine
- Develop the different design for the garment components: sleeves yokes, neck, cuffs.
- Prepare frame fitting for hand aari
- Demonstrate locking, starting and finishing of the aari chain stitch, with factual knowledge of different types of materials & stitches.
- Prepare samples or coaster through straight, curved & sequence lines.
- Decorate a sari by Hand aari method with sequence work
- Prepare the sample of drawn & pulled thread, Assisi, Cut, Swiss, shadow work with quality concepts.
- Prepare the sample of phulkari of Punjab, kantha of Bengal, kasuti of Karnataka, chikankari of Luckhnow , kashida of Kashmir, chamba of Himachal, kutch of Karnataka with quality concepts.
- Prepare the sample of single and double cane weaving, fancy net with lazy daizy, cross stitch, circle and button hole net work with quality concepts.
- Prepare the sample of simple ,cut and felt appliqué work with quality concepts
- Lay out of frock, ladies kurta, gents kurta and toper and placement on them arcitale.
- Carry out estimation and costing of garments.
- Practice of different hand aari stitches.
- Develop various hand aari design with the help of accessories.
- Recall and prepare combination of zig-zag machin stitches and work style with the appliqué & satin, cording & stem, stem & satin, running & satin, shade & satin.
Surface Ornamentation Technique MCQs
1:-Which one of the following is flat stitch ?
A:-Chain stitch
B:-Satin stitch
C:-Blanket stitch
D:-Fly stitch
Ans: B
2:-Which one of the following is a knotted stitch ?
A:-Kashmiri
B:-Satin
C:-Lazy dazy
D:-Harring bone stitch
Ans: A
3:-What is called name of hemming stitch ?
A:-Back stitch
B:-Running stitch
C:-Stem stitch
D:-Turpai stitch
Ans: D
4:-How many type of tracing ?
A:-5 type
B:-2 type
C:-7 type
D:-4 type
Ans: C
5:-Which one of the following stitch is done by machine embroidery ?
A:-Kantha stitch
B:-Cording stitch
C:-Feather stitch
D:-Fly stitch
Ans: B
6:-Select the different name other than Indian embroidery
A:-Phulkari
B:-Kutch
C:-Swiss work
D:-Kashida
Ans: C
7:-Mention that which is not a type of net work ?
A:-Net with cross stitch
B:-Net with lazy daizy
C:-Button hole net
D:-Phulkari
Ans: D
8:-While ironing the woolen embroidery garments use
A:-Low heat
B:-More heat
C:-Iron by keeping them
D:-Direct iron
Ans: B
9:-Who will get benefit by quality control ?
A:-Company
B:-Factory
C:-Shop
D:-All of these
Ans: D
10:-Where is wave stitch used ?
A:-Couching
B:-Net work
C:-Smoking
D:-Zig-zag
Ans: C
11:-Heavy work of aari is called
A:-Kamdani
B:-Zardoir
C:-Kantha
D:-Phulkari
Ans: B
12:-The traditional embroidery kashida was started from which place ?
A:-Kashmir
B:-Bengal
C:-Lucknow
D:-Gujrat
Ans: A
13:-From the following which is not related with cut work ?
A:-Simple cut work
B:-Patch work
C:-Fancy cut work
D:-Satin net work
Ans: B
14:-Which is not a fancy net work from the following ?
A:-Net with lazy daisy
B:-Flat applique
C:-Net with button hole
D:-Net with cross
Ans: B
15:-Stages of inspection are
A:-During the work
B:-Magazines
C:-In every state of production
D:-All of these
Ans: C
16:-What will you do for removing stains ?
A:-Rubs the stain
B:-Wash with soap
C:-Use chemical
D:-All of these
Ans: D
17:-Which stitch is used in shadow work ?
A:-Button holes
B:-Chain stitch
C:-Fishbone
D:-Eyelet
Ans: C
18:-The word aari derives from the word
A:-"Adda"
B:-"Aar"
C:-"Sitara"
D:-"Crewel"
Ans: B
19:-Aari embroidery look like a
A:-Stem
B:-Flat stitch
C:-Chain
D:-Cross stitch
Ans: C
20:-How many colours in a colour wheel ?
A:-3
B:-10
C:-12
D:-16
Ans: C
A:-Chain stitch
B:-Satin stitch
C:-Blanket stitch
D:-Fly stitch
Ans: B
2:-Which one of the following is a knotted stitch ?
A:-Kashmiri
B:-Satin
C:-Lazy dazy
D:-Harring bone stitch
Ans: A
3:-What is called name of hemming stitch ?
A:-Back stitch
B:-Running stitch
C:-Stem stitch
D:-Turpai stitch
Ans: D
4:-How many type of tracing ?
A:-5 type
B:-2 type
C:-7 type
D:-4 type
Ans: C
5:-Which one of the following stitch is done by machine embroidery ?
A:-Kantha stitch
B:-Cording stitch
C:-Feather stitch
D:-Fly stitch
Ans: B
6:-Select the different name other than Indian embroidery
A:-Phulkari
B:-Kutch
C:-Swiss work
D:-Kashida
Ans: C
7:-Mention that which is not a type of net work ?
A:-Net with cross stitch
B:-Net with lazy daizy
C:-Button hole net
D:-Phulkari
Ans: D
8:-While ironing the woolen embroidery garments use
A:-Low heat
B:-More heat
C:-Iron by keeping them
D:-Direct iron
Ans: B
9:-Who will get benefit by quality control ?
A:-Company
B:-Factory
C:-Shop
D:-All of these
Ans: D
10:-Where is wave stitch used ?
A:-Couching
B:-Net work
C:-Smoking
D:-Zig-zag
Ans: C
11:-Heavy work of aari is called
A:-Kamdani
B:-Zardoir
C:-Kantha
D:-Phulkari
Ans: B
12:-The traditional embroidery kashida was started from which place ?
A:-Kashmir
B:-Bengal
C:-Lucknow
D:-Gujrat
Ans: A
13:-From the following which is not related with cut work ?
A:-Simple cut work
B:-Patch work
C:-Fancy cut work
D:-Satin net work
Ans: B
14:-Which is not a fancy net work from the following ?
A:-Net with lazy daisy
B:-Flat applique
C:-Net with button hole
D:-Net with cross
Ans: B
15:-Stages of inspection are
A:-During the work
B:-Magazines
C:-In every state of production
D:-All of these
Ans: C
16:-What will you do for removing stains ?
A:-Rubs the stain
B:-Wash with soap
C:-Use chemical
D:-All of these
Ans: D
17:-Which stitch is used in shadow work ?
A:-Button holes
B:-Chain stitch
C:-Fishbone
D:-Eyelet
Ans: C
18:-The word aari derives from the word
A:-"Adda"
B:-"Aar"
C:-"Sitara"
D:-"Crewel"
Ans: B
19:-Aari embroidery look like a
A:-Stem
B:-Flat stitch
C:-Chain
D:-Cross stitch
Ans: C
20:-How many colours in a colour wheel ?
A:-3
B:-10
C:-12
D:-16
Ans: C
21:-Which fabric is used in Assisi work ?
A:-Cotton fabric
B:-Counting thread fabric
C:-Net fabric
D:-Velvet fabric
Ans: B
22:-Which fabric is used in shadow work ?
A:-Weaving fabric
B:-Net fabric
C:-Cotton fabric
D:-Transparent fabric
Ans: D
23:-Which stitch is completed by Assisi work ?
A:-Cross stitch
B:-Running stitch
C:-Applique work
D:-Chain stitch
Ans: A
24:-Cut work is called
A:-A drawing work
B:-An open work
C:-Chikankari
D:-Kashida
Ans: B
25:-Which embroidery use white color thread ?
A:-Kantha
B:-Phulkari
C:-Chikankari
D:-Kashida
Ans: C
26:-Which embroidery is famous in Punjab ?
A:-Phulkari
B:-Kantha
C:-Kutch
D:-Chikankari
Ans: A
27:-Which state is famous of kshida embroidery ?
A:-Tamilnadu
B:-Kashmir
C:-Karnatica
D:-Punjab
Ans: B
28:-Which embroidery is done by coppiler ?
A:-Ahir bharat
B:-Kambi bharat
C:-Mochi bharat
D:-Hear bharat
Ans: C
29:-Which work is famous in moti bahrat ?
A:-Sequins work
B:-Mirrior work
C:-Bead work
D:-Thread work
Ans: C
30:-Which embroidery is used in garment stitch ?
A:-Phulkari
B:-Kasuti
C:-Kashida
D:-Chikankari
Ans: B
31:-What is the meaning of "bagh" ?
A:-Flower
B:-Leaf
C:-Tree
D:-Garden
Ans: D
32:-Which type of fibre is pashmina ?
A:-Wool
B:-Nylon
C:-Silk
D:-Cotton
Ans: A
33:-Which stitch is used in kantha embroidery ?
A:-Running
B:-Satin
C:-Chain
D:-Button hole
Ans: A
34:-When you add black to a colour, what is that colour ?
A:-Tone
B:-Tint
C:-Shade
D:-Tertiary
Ans: A
35:-Sindhi embroidery is famous in
A:-Punjab
B:-Gujarat
C:-Uttar Pradesh
D:-Himachal Pradesh
Ans: B
36:-The net cloth used in applique work is called
A:-Simple applique
B:-Cut applique
C:-Felt applique
D:-Net applique
Ans: D
37:-What is the meaning of center design ?
A:-Cloth center
B:-Design center
C:-Cloth and design
D:-Tracing paper center
Ans: C
38:-When you added white to a colour, what is that colour is called ?
A:-Tone
B:-Tint
C:-Shade
D:-Tertiary
Ans: B
39:-Which stitch is done by applique work ?
A:-Chain stitch
B:-Buttonhole stitch
C:-Running stitch
D:-Blind stich
Ans: B
40:-Applique is done by
A:-Hand embroidery
B:-Machine embroidery
C:-Computerized embroidery
D:-Manual machine embroidery
Ans: D
41:-Embroidery works in ironed on
A:-Front side
B:-Back side
C:-Top side
D:-Down side
Ans: B
42:-How many number of colors are in color wheel ?
A:-3
B:-18
C:-12
D:-10
Ans: C
43:-Which is a cool color ?
A:-Yellow
B:-Orange
C:-Green
D:-Red
Ans: C
44:-Which one is loop stitch ?
A:-Satin
B:-Kashmiri
C:-Lazy dazy
D:-Long and short stitch
Ans: C
45:-Oval eye of embroidery needle should be
A:-Large
B:-Medium
C:-Small
D:-Beeds needle
Ans: A
46:-Which thread is commonly suitable for hand embroidery ?
A:-Silk
B:-Cotton
C:-Nylon
D:-Woolean
Ans: B
47:-Cut work is done by
A:-Hand
B:-Machine
C:-Hand and machine
D:-Computerized machine
Ans: C
48:-Where the cross stitches is mostly used ?
A:-Cotton fabric
B:-Counted thread fabric
C:-Net fabric
D:-Velvet fabric
Ans: B
49:-When you add white colour that is called
A:-Tone
B:-Tint
C:-Shade
D:-Tertitary
Ans: B
50:-Tailors square are also called as
A:-Curve ruler
B:-Patten square
C:-T-square
D:-L-square
Ans: D
51:-Cutting table is used for
A:-Marking cutting and constructing garments
B:-Marking stitching
C:-Planing and arranging garments
D:-Fusing garments
Ans: A
52:-What kinds of colours are used in tracing method ?
A:-Red, yellow and white
B:-Green, red and yellow
C:-Blue, green and violet
D:-Blue, white and yellow
Ans: D
53:-What is used for pouncing in tracing method ?
A:-Pencil
B:-Precking wheel
C:-Pen
D:-Colour pencil
Ans: B
54:-When mixing secondary colour in same quality we get
A:-Primary colour
B:-Natural colour
C:-Tertiary colour
D:-Chromatic colour
Ans: C
55:-Fashion disk made up of
A:-Steel
B:-Plastic
C:-Glass
D:-Wood
Ans: B
56:-Which method will remove wrinkles, share pen, crease, flattlen, bulky, layers and open seems ?
A:-Fusing method
B:-Pracing method
C:-Ironing method
D:-Tracing method
Ans: B
57:-Which one of the time communicate a feeling of left times and spirituality ?
A:-Diagonal lines
B:-Vetical lines
C:-Horizontal lines
D:-Curved lines
Ans: D
58:-Shapes can be created by
A:-Line
B:-Design
C:-Illusion
D:-Colour wheel
Ans: A
59:-What type of terracing method is used for aari work ?
A:-Pounce method
B:-Direct method
C:-Carbon paper method
D:-Iron method
Ans: A
60:-"Proportion" in enyolyes the relationship between
A:-Sizes scale
B:-Shapes colour
C:-Texure colours
D:-Shapes design
Ans: A
61:-Which of the following lines makes the figure slim ?
A:-Horizontal lines
B:-Diagonal lines
C:-Curve line
D:-Vertical lines
Ans: D
62:-What is the two types of garments design ?
A:-Structure and decorative design
B:-Nature and stylized design
C:-Gematric and abstract design
D:-Nature and decorative design
Ans: A
63:-Which one is the fire sided shape with five angles ?
A:-Rectangle
B:-Pentagon
C:-Ellipse
D:-Hexagon
Ans: B
64:-Stretched from is u
A:-Machine embroidery
B:-Cut work
C:-Aari work
D:-Shade work
Ans: C
65:-The speed of zig zag machine is controlled by
A:-Tension disc
B:-Padal
C:-Take up desser
D:-Slide plate
Ans: B
66:-Industrial embroidery machine is a
A:-Computerized embroidery machine
B:-Power machine
C:-Treadle machine
D:-Senring and embroidery machine
Ans: A
67:-Which part is used for covering the needle bar and pressure bar in senring machine ?
A:-Face plate
B:-Slide palte
C:-Hook
D:-Stitch controller
Ans: A
A:-Cotton fabric
B:-Counting thread fabric
C:-Net fabric
D:-Velvet fabric
Ans: B
22:-Which fabric is used in shadow work ?
A:-Weaving fabric
B:-Net fabric
C:-Cotton fabric
D:-Transparent fabric
Ans: D
23:-Which stitch is completed by Assisi work ?
A:-Cross stitch
B:-Running stitch
C:-Applique work
D:-Chain stitch
Ans: A
24:-Cut work is called
A:-A drawing work
B:-An open work
C:-Chikankari
D:-Kashida
Ans: B
25:-Which embroidery use white color thread ?
A:-Kantha
B:-Phulkari
C:-Chikankari
D:-Kashida
Ans: C
26:-Which embroidery is famous in Punjab ?
A:-Phulkari
B:-Kantha
C:-Kutch
D:-Chikankari
Ans: A
27:-Which state is famous of kshida embroidery ?
A:-Tamilnadu
B:-Kashmir
C:-Karnatica
D:-Punjab
Ans: B
28:-Which embroidery is done by coppiler ?
A:-Ahir bharat
B:-Kambi bharat
C:-Mochi bharat
D:-Hear bharat
Ans: C
29:-Which work is famous in moti bahrat ?
A:-Sequins work
B:-Mirrior work
C:-Bead work
D:-Thread work
Ans: C
30:-Which embroidery is used in garment stitch ?
A:-Phulkari
B:-Kasuti
C:-Kashida
D:-Chikankari
Ans: B
31:-What is the meaning of "bagh" ?
A:-Flower
B:-Leaf
C:-Tree
D:-Garden
Ans: D
32:-Which type of fibre is pashmina ?
A:-Wool
B:-Nylon
C:-Silk
D:-Cotton
Ans: A
33:-Which stitch is used in kantha embroidery ?
A:-Running
B:-Satin
C:-Chain
D:-Button hole
Ans: A
34:-When you add black to a colour, what is that colour ?
A:-Tone
B:-Tint
C:-Shade
D:-Tertiary
Ans: A
35:-Sindhi embroidery is famous in
A:-Punjab
B:-Gujarat
C:-Uttar Pradesh
D:-Himachal Pradesh
Ans: B
36:-The net cloth used in applique work is called
A:-Simple applique
B:-Cut applique
C:-Felt applique
D:-Net applique
Ans: D
37:-What is the meaning of center design ?
A:-Cloth center
B:-Design center
C:-Cloth and design
D:-Tracing paper center
Ans: C
38:-When you added white to a colour, what is that colour is called ?
A:-Tone
B:-Tint
C:-Shade
D:-Tertiary
Ans: B
39:-Which stitch is done by applique work ?
A:-Chain stitch
B:-Buttonhole stitch
C:-Running stitch
D:-Blind stich
Ans: B
40:-Applique is done by
A:-Hand embroidery
B:-Machine embroidery
C:-Computerized embroidery
D:-Manual machine embroidery
Ans: D
41:-Embroidery works in ironed on
A:-Front side
B:-Back side
C:-Top side
D:-Down side
Ans: B
42:-How many number of colors are in color wheel ?
A:-3
B:-18
C:-12
D:-10
Ans: C
43:-Which is a cool color ?
A:-Yellow
B:-Orange
C:-Green
D:-Red
Ans: C
44:-Which one is loop stitch ?
A:-Satin
B:-Kashmiri
C:-Lazy dazy
D:-Long and short stitch
Ans: C
45:-Oval eye of embroidery needle should be
A:-Large
B:-Medium
C:-Small
D:-Beeds needle
Ans: A
46:-Which thread is commonly suitable for hand embroidery ?
A:-Silk
B:-Cotton
C:-Nylon
D:-Woolean
Ans: B
47:-Cut work is done by
A:-Hand
B:-Machine
C:-Hand and machine
D:-Computerized machine
Ans: C
48:-Where the cross stitches is mostly used ?
A:-Cotton fabric
B:-Counted thread fabric
C:-Net fabric
D:-Velvet fabric
Ans: B
49:-When you add white colour that is called
A:-Tone
B:-Tint
C:-Shade
D:-Tertitary
Ans: B
50:-Tailors square are also called as
A:-Curve ruler
B:-Patten square
C:-T-square
D:-L-square
Ans: D
51:-Cutting table is used for
A:-Marking cutting and constructing garments
B:-Marking stitching
C:-Planing and arranging garments
D:-Fusing garments
Ans: A
52:-What kinds of colours are used in tracing method ?
A:-Red, yellow and white
B:-Green, red and yellow
C:-Blue, green and violet
D:-Blue, white and yellow
Ans: D
53:-What is used for pouncing in tracing method ?
A:-Pencil
B:-Precking wheel
C:-Pen
D:-Colour pencil
Ans: B
54:-When mixing secondary colour in same quality we get
A:-Primary colour
B:-Natural colour
C:-Tertiary colour
D:-Chromatic colour
Ans: C
55:-Fashion disk made up of
A:-Steel
B:-Plastic
C:-Glass
D:-Wood
Ans: B
56:-Which method will remove wrinkles, share pen, crease, flattlen, bulky, layers and open seems ?
A:-Fusing method
B:-Pracing method
C:-Ironing method
D:-Tracing method
Ans: B
57:-Which one of the time communicate a feeling of left times and spirituality ?
A:-Diagonal lines
B:-Vetical lines
C:-Horizontal lines
D:-Curved lines
Ans: D
58:-Shapes can be created by
A:-Line
B:-Design
C:-Illusion
D:-Colour wheel
Ans: A
59:-What type of terracing method is used for aari work ?
A:-Pounce method
B:-Direct method
C:-Carbon paper method
D:-Iron method
Ans: A
60:-"Proportion" in enyolyes the relationship between
A:-Sizes scale
B:-Shapes colour
C:-Texure colours
D:-Shapes design
Ans: A
61:-Which of the following lines makes the figure slim ?
A:-Horizontal lines
B:-Diagonal lines
C:-Curve line
D:-Vertical lines
Ans: D
62:-What is the two types of garments design ?
A:-Structure and decorative design
B:-Nature and stylized design
C:-Gematric and abstract design
D:-Nature and decorative design
Ans: A
63:-Which one is the fire sided shape with five angles ?
A:-Rectangle
B:-Pentagon
C:-Ellipse
D:-Hexagon
Ans: B
64:-Stretched from is u
A:-Machine embroidery
B:-Cut work
C:-Aari work
D:-Shade work
Ans: C
65:-The speed of zig zag machine is controlled by
A:-Tension disc
B:-Padal
C:-Take up desser
D:-Slide plate
Ans: B
66:-Industrial embroidery machine is a
A:-Computerized embroidery machine
B:-Power machine
C:-Treadle machine
D:-Senring and embroidery machine
Ans: A
67:-Which part is used for covering the needle bar and pressure bar in senring machine ?
A:-Face plate
B:-Slide palte
C:-Hook
D:-Stitch controller
Ans: A